Understanding De-Tracking Problems in Skid Steer Rubber Tracks

Understanding De-Tracking Problems in Skid Steer Rubber Tracks

When it comes to skid steer tracks, most operators do not understand the reasons behind de-tracking problems. This results in frequent breakdowns and decreases overall equipment efficiency. Read on to learn in-depth knowledge about de-tracking in skid steer rubber tracks, so you know how to maintain them.

Common Causes of De-Tracking in Skid Steer Tracks

  • Track Spring Tension
    Broken track springs and inadequate track spring tension are frequent causes of the de-tracking problem in skid steers. Many manufacturers have track adjuster assemblies with two settings for track tension, loose for steel tracks and tight for skid steer rubber tracks. It is essential to check the track tension frequently to avoid this issue.
  • Leakage in Track Adjusters
    Another reason for de-tracking in skid steers is leaking adjuster seals. Also, the tracks may become loose over time due to rust or contaminated parts, increasing the chances of de-tracking. You can eliminate this by tightening the loosened tracks and monitoring them regularly. You could also pull out the adjuster and examine it frequently to avoid any mishaps.
  • Worn Sprockets and Undercarriage
    Be sure to repair or replace these parts to ensure your tracks are correctly installed. Make sure that all rollers rotate smoothly, the roller flanges are upright, and the idler has a straight-sided centre guide flange. This can prevent your skid steer rubber tracks from de-tracking.
  • Inaccurate Installation of the Rubber Tracks
    Fitting your equipment with incorrect tracks or using improper installation techniques can also contribute to the de-tracking problem in skid steers. If you are concerned about having an installation issue, be sure to consult professionals. Keep in mind the following indicators of poorly fitting tracks:

    • Too much space on either side of the idler flange or sprocket
    • Banging on the sprocket
    • Scratches on the surface of the rubber tracks
    • Tracks not seating correctly on the roller
  • Using Incorrect Operation Techniques
    A rough operator who uses improper operating methods can also be the cause of de-tracking. Listed below are a few fundamental operating rules to avoid problems with your skid steer tracks:

    • Avoid tracking over obstacles such as rocks, rubbles, and more.
    • Be patient when refitting a track to ensure it is installed correctly.
    • When tracking over a curb or a pile, do not turn on the side slopes.
    • Take wider turns and ensure both tracks are moving to reduce the buildup of rubble in them.
  • Harsh Operating Conditions
    Heavy sand and mud are the worst operating grounds for rubber tracks. They cause the soil to build up inside them, increasing the chances of de-tracking. You can easily avoid this by raising your equipment off the ground and tracking at high speed. This helps to clear the rubber tracks and enhances their life.
  • Installing Faulty or Incorrect tracks
    Your tracks may flex and ride off the idler or sprocket if the cables inside them are broken. Also, it is essential to ensure your rubber tracks have integral rigidity so you can operate the machine in extreme conditions as well.

Get High-Quality Skid Steer Tracks with Us

High-Quality Skid Steer Tracks

Tag Equipment is a leading distributor, offering top-quality rubber tracks for sale at the best prices. We carry products by major brands, including Camso, Traxter for all types of machines by big names such as Bobcat, Case, John Deere, Kubota, CAT, New Holland, and more.

For more information about our over the tire tracks and rubber tracks for skid steers, CTL Loaders, and MTL Loaders, please call us at 416-716-5850.

Also Read: